A rebellious lawn doesn’t allow you to take it for granted. Whether you have time or not, you have to take care of it and maintain it from time to time. The mess caused by outgrown grass always teases you when you can’t spare some time to cut it. But, when you finally try to take up this tedious task all at once, you might feel lost. That sudden approach doesn’t work when it comes to high grass.
It is vital to cut the overgrown lawn gradually so that you can save the land and its essential nutrients. Moreover, having a warm and sunny day for each mowing session is extremely important. If the grass blades are wet or there is fog in the air, it will increase the risk of turf diseases. This article is all about different ways and various methods to cut overgrown grass. Let’s have a look.
Best Way to Cut High Grass
1. Using a Mower
One of the best tools for cutting grass is a mower. A mower deck may have a four-inch cutting height on an average basis. So, if the grass has already exceeded four inches, then you have to adjust the deck setting and start working. Initially, go slow and only cut down half of the actual height and then eventually go further and cut down more. This process will avoid plant stress and provide the best possible result.
But how to cut tall grass? Well, here, keep a few things in mind. For example, you must not operate the machine at its full speed as it may cause stress to the mower. Go slowly and steadily. Apart from that, it is also essential that your mower is equipped with all sharp blades that can efficiently cut tall grass. One more point to take care of is that the mowing process should only be done when the grass is dried. Wet or moist grass always creates problems for the mower and also increases the cutting time. It also requires a lot of effort without providing sufficient output.
2. Taking the Help of a Scythe Or Sickle
You may have to put a lot of effort, but a scythe can easily remove tall grass even when it has reached a meter of height. You may not find a scythe at any store, but it is readily available online. You may get a sickle that is commonly found in local garden centers. The problem with a sickle is that it is smaller in size. You have to keep a lot of patience as the sickle will surely take quite a long hours as a tallgrass cutter.
If you want to purchase a scythe, then try to find an Austrian one. If you are worried about how to cut really long grass, don’t worry. It’s easier than you think. It has the ability to remove tall grass with each slash. Even the sickle can be used the way you would handle a scythe, but it is much smaller and lighter comparatively. Both of these tools are relatively simple to use and. A scythe comes with a curved steel blade that is attached to a wooden shaft. The shaft is also known as a snath. You have to use the handles of the snath to connect the scythe and cut the tall blades of the grass.
3. Use of a String Trimmer along with the Mower
There are two possible ways to use these tools to cut the outgrown grass. One is that you can either use a string trimmer before using a mower or attach the trimmer with plastic wire and start working. I do not recommend connecting the steel blade to the string trimmer. Even if you are using a mower, then also you should only cut down a fraction of the grass each time. The string trimmer might become a reason to stick up the grass, so it’s essential removing any debris or grass clippings after using it for a few minutes.
A string trimmer can also work on the bentgrass. So, even if you haven’t maintained the lawn for more than a year, then also you can get through it with ease. Just keep one thing in mind is that you will have to water the lawn deeply after cutting so that the grass can grow again, and the garden will recover as soon as possible. Once you are done with the grass irrigation process, you should not do anything for a week, at least! After seven to eight days, trim the lawn again with the mower by setting it to the highest.
These are the top three ways to cut high grass. According to experts, the best way to cut overgrown grass is by using a mower so that you can get a better output without putting much effort. For more tips and tricks, stay tuned!